What Are the Steps in House Tanks Cleaning?

What Are the Steps in House Tanks Cleaning?

Clean water storage tanks in your house are essential to ensure that you have a safe supply of water. As time passes, sediments, algae, and other contaminants collect at the bottom of the tanks and deteriorate water quality. It is important that house tanks are cleaned regularly to prevent such problems, so here's a step-by-step in the house tank cleaning process.

Preparation and Safety Measures

It's always important to prepare to clean a tank by turning off the water supply, preparing all necessary equipment, and putting on protection such as gloves, masks, and goggles for safety purposes.

Draining the Tank

Ensure that the tank is completely emptied with the help of a pump or a bottom valve and exclude the water and the debris in a step. Turn off the tank from any pipe filtration system in order that no contamination will occur in the tank while cleaning.

Interior Brushing

After draining the tank, use a long-handled brush to scrub the inside walls and floor, focusing on dirt, algae, or scale. Use a non-toxic cleaning solution to loosen any resistant deposits.

RINSE AND VACUUM

By each visit and scrubbing, special attention afterward is paid to remove all the scrubs and signs on the entire tank surface, then vigorous rinsing with clean water is done to remove both the detached waste and the cleaning solution. A wet vacuum should particularly work at this step since it sucks dirty water and remaining waste. Ensure all parts of the tank are well rinsed in all corners and crevices free of any other contaminants.

Disinfection

Disinfection is the killing of any remaining bacteria or harmful microorganisms. Use an appropriate disinfectant, like chlorine bleach, diluted according to the manufacturer's directions. Spread the interior of the tank with the disinfectant and let it sit for a stipulated time period, usually 30 minutes to 1 hour. By this process, the tank will be sanitized and fit to be used for storing drinking water.

Final Rinse and Inspection

After disinfection, the final rinse should be carried out with clean water in order to eliminate all the remaining disinfectant. This process is very essential to prevent chemical contamination of water. After the rinsing process is over, the tank should be properly checked that all the cleaning and disinfections have been effective. Check for possible damage or signs of dirt that may have been left on the tank.

Refilling the Tank

Once you are happy that the tank is clean and its integrity is intact, you may go ahead and refill it with clean water. Turn the water supply back on, and let the tank refill. It is good practice to run the water for some minutes through the taps attached to the tank so that any remaining traces of the disinfectant are washed out through the system.

Regular Maintenance

House tanks should be regularly cleaned to ensure good water quality, at least once or twice a year, depending on the source and intended use of the water. Regular inspection and maintenance can possibly fight the accretion of contaminants in the tanks, and even make sure that your water supply will stay clean and safe.

Regular scheduled maintenance and professional cleaning services of the house tanks are given by the Zenith Crew service which will keep the tanks cleaned and disinfected, hence bringing out a healthy water supply for the residents.